Varenr.
ISM ISM831
Reglo Digital dispensing slangepumpe med LED display MS-2/06, 2 kanaler, 6 ruller
Easily adjust speed of compact multichannel pump
Digital models have preprogrammed tube diameters and flow rates for easy set up
Dispense by volume or set time intervals
Display shows speed in 1% steps and flow rate in mL/min
These space-saving pumps provide up to four pumping channels while using very little benchtop space. Self-lubricating, Ertalyte® rollers provide consistent flow with reduced tubing wear. Use Click’n’go™ minicartridges for consistent results. Reverse flow direction with the flip of a switch. Select two- or four-channel pumps; twelve roller pumps provide smooth, even flow.
Continuously pump or dispense in any of four modes:
– Flow rate: 0.003 to 59 mL/min
– By time: 0.1 seconds to 999.9 hours
– Batches: set delay between dispensed volumes
– Drip-free: program back-steps to prevent drips
Pumps feature analog input and output controls, as well as an RS-232 interface for control by a computer.
Remote control capabilities: RS-232 to control all operating functions (DB9 male); 0 to 5, 0 to 10 VDC, 0 to 20, 4 to 20 mA for speed control, start/stop, reverse direction, and autostart via contact closure
(DB15 male); footswitch and hand dispenser (three-pin DIN port).
Choose optional minicartridges with adjustable occlusion to manually vary pressure on each channel. Pumps are designed to be used with 3-stop tubing.
Digital models have preprogrammed tube diameters and flow rates for easy set up
Dispense by volume or set time intervals
Display shows speed in 1% steps and flow rate in mL/min
These space-saving pumps provide up to four pumping channels while using very little benchtop space. Self-lubricating, Ertalyte® rollers provide consistent flow with reduced tubing wear. Use Click’n’go™ minicartridges for consistent results. Reverse flow direction with the flip of a switch. Select two- or four-channel pumps; twelve roller pumps provide smooth, even flow.
Continuously pump or dispense in any of four modes:
– Flow rate: 0.003 to 59 mL/min
– By time: 0.1 seconds to 999.9 hours
– Batches: set delay between dispensed volumes
– Drip-free: program back-steps to prevent drips
Pumps feature analog input and output controls, as well as an RS-232 interface for control by a computer.
Remote control capabilities: RS-232 to control all operating functions (DB9 male); 0 to 5, 0 to 10 VDC, 0 to 20, 4 to 20 mA for speed control, start/stop, reverse direction, and autostart via contact closure
(DB15 male); footswitch and hand dispenser (three-pin DIN port).
Choose optional minicartridges with adjustable occlusion to manually vary pressure on each channel. Pumps are designed to be used with 3-stop tubing.
Varenr. | ISM ISM831 |
---|---|
Kategori | Pumper |
Design | 3-stop, Benchtop, RS 232 |
Kanaler | 2 |
Produktnavn | Slangepumpe REGLO Digital, 2 kanaler 6 ruller |
Beskrivelse | Reglo Digital dispensing slangepumpe med LED display MS-2/06, 2 kanaler, 6 ruller |
Brand | Ismatec |
Antal i pkn | 1 |
Producent | Cole-Palmer |
Producent nr. | ISM831-230 |
Hast.indstilling | Flow (μL/min eller mL/min) |
Hast. graduering | 0,1 rpm |
Hast.område | 3,2-160 rpm |
Slangemontering | Click'n'go cassettes |
Vægt | 4,4 kg |
Betjeningspanel | Digital |
Power | 75 W |
Besk.godkendelse | IP30 |
Antal ruller | 6 |
Dimensioner | 178 x 100 x 143 |
Produkttype | Slangepumper |
Til slange/rør ID (mm) | 0,13-3,17 |
Type | Elektrisk |
Type 2 | Udstyr |
Flow | 0,003-68 ml/min |
Bemærkning | DC motor |
Enhed | pcs |